Buy IEC 61111 & ASTM D178 Electrical Safety Mats in International | Class 0–4, Up to 36 kV, with Compliance Certificates
Product range
Introducing Duratuf Insulating Rubber Matting which is highly electrical resistant and non-conductive in nature. Being non-conductive; these electrical insulation mats protect the electricians, workmen, and operators from any disastrous shocks originating from the high voltage electrical equipment. As they are used in front of switchboards and control panels, they are also often referred to as Switchboard Matting.
IEC 61111:2009
Designed for designated work areas around electrical equipment in substations, power generation, renewable energy and industrial process-control environments.
ASTM D178
Insulating mats for industrial electrical work areas. Select the appropriate construction and grade according to the applicable specification and environmental exposure.
Trusted & Certified
Technical reference
Only takes a few seconds!
| Standard | Class Range | Maximum Use Voltage | AC Proof Voltage | Di-electric Strength | Thickness | Color |
|---|---|---|---|---|---|---|
| IEC 61111 | 0 to 4 | Up to 36kV | 5.0 kV - 40.0 kV | 10.0 kV to 50.0 kV | 2mm to 5mm | Black |
| ASTM D178 | 0 to 4 | Up to 36kV | 5.0 kV - 40.0 kV | 10.0 kV to 50.0 kV | 3.2mm to 12.7mm | Black |
Application
Insulating rubber mats serve a multitude of industries in International. Their main uses include:
In substations and distributing stations for protection from electrical shock.
Grades that resist oil are usable within refineries and petrochemical chemical environments.
Sturdy mats intended for highly impact and abrasive environments.
Protective covers for control panels and electrical machines.
Located in control rooms of wind turbines and solar inverter stations.
Our Clients
Our clients are not just business collaborations but relationships we value for a lifetime. We commit ourselves to manufacture features rich high quality insulating mats.
Why Duratuf
Use product documentation and a site-specific assessment to decide whether a particular Duratuf mat is right for the job.
We have been providing quality-assured products to our customers for the past 16+ years.
Our electrical insulating mats are compliant with the IEC 61111:2009 and ASTM D178 standards.
We can customize the insulating mats as per your required sizes and thicknesses.
We can cater to large volumer orders and urgent requirements for your industries.
Availability of technical experts and ready support to attend to your queries.
FAQs
Electrical safety mat selection is standards-led. The answers below are intentionally qualified; check current manufacturer documents and local requirements before specifying.
We recommend the insulating mats as per IEC 61111 ranging from 2mm to 4mm thickness with anti-skid textured on both the bottom and top surfaces. However, insulating mats in higher thicknesses can also be customized depending upon the working voltage resistance required. Download Datasheet
We also provide electrical insulation mats with a fine-ribbed design that comes in a minimum 3mm thickness for up to Class 0 to 2 and in 4.5~5mm thickness for Class 3-4. If you require in higher thickness, we can also customize the same for you in black and grey colour. Download Datasheet
The thickness recommended by the ASTM D178 standard is usually 3.2mm to 12.7 mm. The thickness depends upon the working/use voltage resistance of the electrical rubber mats. Electrical rubber mats (Type-I grade) are moisture and water-resistant. Our standard antiskid design is both side textured surfaces. Download Datasheet
Type-II grade insulating rubber mats offer some additional properties like flame, ozone, and oil resistance on both sides of antiskid textured surfaces. It can also be customized with individual properties or a combination of properties. Download Datasheet
We offer the switchboard matting in fine ribbed top surface design and bottom textured surface. These switchboard matting can be manufactured in both Type I & Type II-ABC ASTM D178 standard. Download Datasheet
