Skip to content

Electrical Rubber Mat in India | IS 15652:2006

Buy IEC 61111 & ASTM D178 Electrical Safety Mats in India | Class 0–4, Up to 36 kV, with Compliance Certificates

Product range

Duratuf XVolt Electrical Rubber Mat

Across India’s industrial landscape, electrical workers operate near live panels, switchgear and transformer equipment in an enormous range of settings. Power plants and substations supply the national grid from facilities spread across every state. Steel mills, oil refineries, pharmaceutical factories, automotive assembly lines, chemical plants and other run their electrical distribution systems through continuous shifts. Data centres, port infrastructure and defence establishments each add to the breadth of electrical environments where operators need reliable protection underfoot. In all of these industries, the mat at the panel needs to meet IS 15652:2006, a requirement that applies from the smallest LT-connected industrial unit to the largest HT substation in the country.

Technician in hard hat and safety vest standing on a red insulating mat in front of switchgear panels

IEC 61111:2009

IEC 61111 Insulating Rubber Mats

Designed for designated work areas around electrical equipment in substations, power generation, renewable energy and industrial process-control environments.

Key features

  • Class range shown as 0–4
  • Multiple thickness options
  • Textured or ribbed surfaces
  • Datasheet-led class selection
  • Manufacturer test documentation
  • Custom sizes may be available
Duratuf technician unrolling a red insulating mat in front of a switchboard panel

ASTM D178

ASTM D178 Switchboard Mats

Insulating mats for industrial electrical work areas. Select the appropriate construction and grade according to the applicable specification and environmental exposure.

Key features

  • Voltage classes listed from 0–4
  • Thickness depends on class
  • Grade depends on work environment
  • Type I and Type II options
  • Oil, ozone or flame-resistant grades may be specified
  • Technical documentation available to request

Trusted & Certified

Standards that stand behind every mat.

Technical reference

Voltage Comparison for Insulating Mats: Technical Specification

Choosing the correct insulating mat depends on your maximum system voltage and working conditions

StandardClass RangeMaximum Use VoltageAC Proof VoltageDi-electric StrengthThicknessColor
IEC 611110 to 4Up to 36kV5.0 kV - 40.0 kV10.0 kV to 50.0 kV2mm to 5mmBlack
ASTM D1780 to 4Up to 36kV5.0 kV - 40.0 kV10.0 kV to 50.0 kV3.2mm to 12.7mmBlack

Talk to our Industrial Safety Expert

Talk to our team about the right insulating solution.

Application

Applications of Dielectic Insulating Mats in India

Insulating rubber mats serve a multitude of industries in India. Their main uses include:

Our Clients

We Are Proud To Work With

Our clients are not just business collaborations but relationships we value for a lifetime. We commit ourselves to manufacture features rich high quality insulating mats.

Why Duratuf

Why Choose Duratuf for Insulating Rubber Matting in India

Use product documentation and a site-specific assessment to decide whether a particular Duratuf mat is right for the job.

Regional Coverage

Explore Duratuf in Asia

Find country-specific information on electrical insulating mats and industrial safety solutions.

Country Directory

Asia

23Countries

FAQs

Questions to settle before procurement.

Electrical safety mat selection is standards-led. The answers below are intentionally qualified; check current manufacturer documents and local requirements before specifying.

IS 5424 was the older standard for electrical rubber mats in India. IS 15652:2006 introduced significantly more rigorous requirements, including type testing for dielectric strength, leakage current, tensile strength, elongation, acid and alkali resistance, flame retardance and ageing properties, none of which were comprehensively covered under IS 5424.

From January 2024, the Department for Promotion of Industry and Internal Trade issued a Quality Control Order making BIS certification mandatory for all insulating mats manufactured or imported into India. In practice, this means no supplier ( domestic or foreign) can legally sell electrical insulating mats in India without a valid BIS licence and ISI mark on the product.

No. A standard rubber floor mat or anti-fatigue mat is not designed or tested for electrical insulation. It may look similar but provides no guaranteed protection against electrical shock because it has not been tested for dielectric strength, leakage current or the other parameters in IS 15652:2006