Skip to content

Top Supplier of Electrical Rubber Mats in Bhutan for High-Voltage Safety

IS 15652 Indian Standard and IEC 61111 International Standard Electrical Safety Mats for Bhutan’s Power and Industrial Sector

Product range

Explore Duratuf Electrical Insulating Mats for Bhutan Industries

All our mats go through voltage class testing from Class A (3.3 kV) through Class 4 (36 kV). With 16+ years in industrial safety solutions expertise and 65+ countries served, we supply Bhutan’s hydropower plants and other industrial sectors with electrical mats that carry the compliance documentation their safety audits requirements.

IEC 61111 Insulating Mat

IEC 61111:2009

IEC 61111:2009 Electrical Insulating Mats

Electrical rubber mats manufactured and tested to IEC 61111:2009 are the preferred choice for Bhutan’s internationally funded industries that operate under global EPC or O&M contracts. The standard classifies mats by dielectric strength and working voltage, giving procurement teams a verifiable basis for selection at each voltage level.

Key features

  • Class 0 to Class 4 with working voltages from 1 kV to 36 kV
  • Thickness range: 2.0 mm to 5.0 mm depending on class
  • Anti-skid top and bottom textured surface
  • Flame retardant and low-temperature resistant down to -25°C
  • High dielectric strength: 10 kV to 50 kV across classes
IS 15652 Insulating Mat

ASTM D178

ASTM D178 Switchboard Mats

Insulating mats for industrial electrical work areas. Select the appropriate construction and grade according to the applicable specification and environmental exposure.

Key features

  • Voltage classes listed from 0–4
  • Thickness depends on class
  • Grade depends on work environment
  • Type I and Type II options
  • Oil, ozone or flame-resistant grades may be specified
  • Technical documentation available to request

Trusted & Certified

Standards that stand behind every mat.

Technical reference

Voltage Comparison for Insulating Mats: Technical Specification

Choosing the right insulating mat depends on your maximum system voltage and working conditions.

StandardClass RangeMaximum Use VoltageAC Proof VoltageDielectric StrengthThicknessColor
IEC 61111:2009Class 0 to Class 41.0 kV to 36.0 kV5.0 kV to 40.0 kV10.0 kV to 50.0 kV2.0 mm to 5.0 mmBlack
IS 15652:2006Class A, B, C3.3 kV to 33.0 kV10.0 kV to 36.0 kV30.0 kV to 65.0 kV2.0 mm to 3.0 mmBlack & Blue

Talk to our Industrial Safety Expert

Talk to our team about the right insulating solution.

Application

Applications of Insulating Rubber Mats in Bhutan

Bhutan’s industrial and energy landscape creates specific electrical safety requirements across several demanding sectors. Our insulating mats are used in:

Our Clients

We Are Proud To Work With

Our clients are not just business collaborations but relationships we value for a lifetime. We commit ourselves to manufacture features rich high quality insulating mats.

Why Duratuf

Why Choose Duratuf for Electrical Safety Matting in Bhutan?

Use product documentation and a site-specific assessment to decide whether a particular Duratuf mat is right for the job.

Regional Coverage

Explore Duratuf in Asia

Find country-specific information on electrical insulating mats and industrial safety solutions.

Country Directory

Asia

23Countries

FAQs

Questions to settle before procurement.

Electrical safety mat selection is standards-led. The answers below are intentionally qualified; check current manufacturer documents and local requirements before specifying.

The Bhutan Standards Bureau (BSB) recognises Indian Standards for product categories where no Bhutan national standard exists. IS 15652:2006 insulating mats certified under BIS and ISI marked have been commercially supplied to Bhutan’s industrial and power sector through Indian supply chains and are accepted at BSB-regulated import checkpoints.

It depends on the system voltage at the specific substation. For 33 kV substations and above, IS 15652 Class C or IEC 61111 Class 3 or Class 4 mats are appropriate. For 11 kV installations, Class B or IEC Class 2 is the standard specification. For LT panels and distribution boards up to 3.3 kV, Class A or IEC Class 1 covers the requirement.

Yes. We supply bulk rolls and custom cut lengths to Bhutan through cross-border logistics from our Bhiwadi facility. Orders include full packing documentation, type test certificates, and product datasheets needed for customs clearance and site safety records.

Yes. IEC mats are available in custom widths up to 1,220 mm and lengths up to 15 m, with thickness up to 14 mm across all classes. IS 15652 mats are available in custom lengths as per project requirements at standard 1.0 m width. Lead times depend on order volume.