Buy Electrical Rubber Mat in Laos | IEC 61111:2009 Safety Mats

Product range

Explore Our Electrical Rubber Mats for Laos Industrial Sectors

All our mats are voltage class tested from Class 0 (1 kV) through Class 4 (36 kV), with full IEC 61111:2009 type test documentation available for EdL procurement, hydropower project safety audits, and SEZ industrial facility compliance submissions.

IEC 61111:2009

IEC 61111:2009 Electrical Insulating Mats

Laos’s power infrastructure involves generating stations, high-voltage transmission corridors, and distribution substations that require quality insulating mats with verified dielectric performance. Our electrical rubber mats are manufactured and tested to IEC 61111:2009, the international standard that Laos’s 2020 electrical equipment safety regulations reference for imported industrial safety equipment.

Key features

Class 0 to Class 4, working voltages from 1 kV to 36 kV
Thickness range: 2.0 mm to 5.0 mm depending on class
Mechanical puncture resistance minimum 70 N
Flame retardant, tested at low temperature down to -25°C
Resistant to oils, acids, and surface ageing
Anti-skid top and bottom textured surface
Dielectric strength: 10 kV to 50 kV across voltage classes

Duratuf technician unrolling a red insulating mat in front of a switchboard panel

ASTM D178

ASTM D178 Switchboard Mats

Insulating mats for industrial electrical work areas. Select the appropriate construction and grade according to the applicable specification and environmental exposure.

Key features

Voltage classes listed from 0–4
Thickness depends on class
Grade depends on work environment

Type I and Type II options
Oil, ozone or flame-resistant grades may be specified
Technical documentation available to request

Technical reference

Voltage Comparison for Insulating Mats: Technical Specification

Choosing the right insulating mat depends on your maximum system voltage and working conditions.

Standard	Class Range	Maximum Use Voltage	AC Proof Voltage	Dielectric Strength	Thickness	Color
IEC 61111:2009	Class 0 to Class 4	1.0 kV to 36.0 kV	5.0 kV to 40.0 kV	10.0 kV to 50.0 kV	2.0 mm to 5.0 mm	Black

Application

Applications of Insulating Rubber Mats in Laos

Laos’s hydropower-led economy and growing industrial base create specific electrical safety requirements across dam infrastructure, mining operations, and SEZ facilities. Our insulating mats are used across these environments effectively:

Hydropower Generating Stations Nam Theun, Nam Ou, and Xe Pian generating stations operate high-voltage control rooms, transformer bays, and switchgear panels at 115 kV and above. IEC 61111 Class 3 and Class 4 mats provide the required dielectric protection for operators working at these voltage levels
EdL Transmission and Distribution Substations Electricite du Laos substations across Vientiane, Savannakhet, and Pakse require voltage-rated insulating mats at control panels and HT/LT switchgear bays as standard operator protection for all distribution personnel
Mining and Mineral Processing Facilities Potash, copper, and coal mining operations in Khammouane and Vientiane provinces run large electrical installations for extraction and processing equipment. Rated insulating mats at MCC rooms and HV feeder panels protect workers operating near high-current systems
Chinese and Thai-Invested SEZ Industrial Zones Special Economic Zones at Savan-Seno, Boten, and Vientiane Capital operate industrial facilities with significant electrical infrastructure. IEC 61111 mats at panel rooms and generator enclosures in these zones meet the international compliance documentation requirements of cross-border investors
Cross-Border Infrastructure and Construction Projects Large road, rail, and industrial construction projects across Laos involve temporary and permanent electrical installations. Site electrical rooms, generator rooms, and transformer bays on these projects require IEC-rated insulating mats for worker protection throughout the construction phase

Our Clients

We Are Proud To Work With

Our clients are not just business collaborations but relationships we value for a lifetime. We commit ourselves to manufacture features rich high quality insulating mats.

Why Duratuf

Why Choose Duratuf for Electrical Safety Matting in Laos?

Use product documentation and a site-specific assessment to decide whether a particular Duratuf mat is right for the job.

16+ Years of Industry Knowledge

We have been serving industries with our quality-assured insulating mats for the past 16+ years.
Legally Required Quality Assurance

Our insulating mats are compliant with the IEC 61111:2009 and ASTM D178 standards.
Customization Capability

We offer customization option for sizes and thicknesses as per your project requirements.
Expertise in Bulk Deliveries

With our efficient supply chain team and well-managed inventory we ensure fulfillment of large-volume orders.
Technical Assistance

From installation to maintenance, we ensure you get end-to-end reolution of queries and support throughout your purchase journey.

FAQs

Questions to settle before procurement.

Electrical safety mat selection is standards-led. The answers below are intentionally qualified; check current manufacturer documents and local requirements before specifying.

Laos’s Ministry of Science and Technology established electrical equipment safety regulations in 2020 referencing international standards for equipment imported and used across the country. IEC 61111:2009 is the applicable international standard for electrical insulating mats in EdL substations, hydropower project facilities, and industrial installations.

Hydropower control rooms and HV transformer bays operating at 33 kV and above require IEC 61111 Class 3 or Class 4 mats. EdL transmission substations at 22 kV require Class 2 or Class 3. For LT distribution boards and site electrical rooms below 1 kV, Class 0 covers the requirement.

Yes. Chinese-invested SEZ facilities and BRI infrastructure projects in Laos typically specify IEC standards for electrical safety equipment procurement.

Yes. Our IEC 61111:2009 mats are available in custom widths up to 1,220 mm and lengths up to 15 m, with thickness up to 14 mm across all voltage classes. For control room-specific dimensions or non-standard panel layouts, share your requirements with our technical team and we will confirm availability and lead time.

Yes. We supply bulk rolls and custom cut lengths to Laos from our Dubai export facility. Every order includes IEC 61111:2009 type test certificates, product datasheets, and packing documentation suitable for Laos customs clearance and project safety records.

Top Supplier of Electrical Insulating Rubber Mats in Laos

Explore Our Electrical Rubber Mats for Laos Industrial Sectors

IEC 61111:2009 Electrical Insulating Mats

Key features

ASTM D178 Switchboard Mats

Key features

Standards that stand behind every mat.

Voltage Comparison for Insulating Mats: Technical Specification

Talk to our Industrial Safety Expert

Applications of Insulating Rubber Mats in Laos

EdL Transmission and Distribution Substations Electricite du Laos substations across Vientiane, Savannakhet, and Pakse require voltage-rated insulating mats at control panels and HT/LT switchgear bays as standard operator protection for all distribution personnel

We Are Proud To Work With

Why Choose Duratuf for Electrical Safety Matting in Laos?

16+ Years of Industry Knowledge

Legally Required Quality Assurance

Customization Capability

Expertise in Bulk Deliveries

Technical Assistance

Explore Duratuf in Asia

Asia

Questions to settle before procurement.

Top Supplier of Electrical Insulating Rubber Mats in Laos

Explore Our Electrical Rubber Mats for Laos Industrial Sectors

IEC 61111:2009 Electrical Insulating Mats

Key features

ASTM D178 Switchboard Mats

Key features

Standards that stand behind every mat.

Voltage Comparison for Insulating Mats: Technical Specification

Talk to our Industrial Safety Expert

Applications of Insulating Rubber Mats in Laos

EdL Transmission and Distribution Substations Electricite du Laos substations across Vientiane, Savannakhet, and Pakse require voltage-rated insulating mats at control panels and HT/LT switchgear bays as standard operator protection for all distribution personnel

We Are Proud To Work With

Why Choose Duratuf for Electrical Safety Matting in Laos?

16+ Years of Industry Knowledge

Legally Required Quality Assurance

Customization Capability

Expertise in Bulk Deliveries

Technical Assistance

Explore Duratuf in Asia

Asia

Questions to settle before procurement.

What electrical insulating mat standard applies to Laos's industries?

Which voltage class of insulating mat is required for hydropower generating stations in Laos?

Can insulating mats be supplied to Laos for Chinese-invested SEZ and infrastructure projects?

Are customised sizes available for Laos hydropower control room and dam facility requirements?

Can electrical insulating mats be exported to Laos in bulk with full compliance documentation?