Duratuf Electric Shock-Proof Mats: An Overview
The Duratuf electric shock proof mats, also known as insulating mats and rubber matting electrical switch rooms, offer protection from electrical accidents. These electric shock proof mats are placed on the ground near high-voltage machines in an industrial or commercial setup.
Having a tested di-electric strength, these mats do not break down when exposed to voltages within the permissible limits. The material composition of the Duratuf high-voltage rubber mats is an elastomer (free from any insertion) and some additional compounds.
Our electrical mats adhere to the updated technical specifications in the Indonesian insulating mat manufacturing standards. Therefore, you can use them across industries in Indonesia like manufacturing, mining, power generation, energy networks, agricultural products processing, and more.
Being one of the most trusted global electrical insulation mat suppliers, we offer all three types of popular electrical mat types: IEC 6111:2009 or BS EN 61111, ASTM D178, and IS 15652.
The mats have tested durability and life span, as well. They can be installed easily than the self adhesive rubber safety mat.
If you want to use the rubber matting electrical switch room in Indonesia, our specialists recommend the IEC 61111:2009 variant. Find the detailed technical specifications below.
Some highlighted features of the Duratuf Electrical Panel Mat
- Chemical and oil resistant: Our electrical mats are resilient against chemicals like mild acids, alkalis, and bases, as well as engine oils and grease.
- Water and moisture resistant: These mats are waterproof and do not let moisture from the floors beneath seep in.
- Color-coded labels: The Duratuf IEC 61111:2009 rubber mat for electrical applications has color-coded labels for easy identification.
- Flame retardant: The mats do not allow fire to spread, unlike other types of rubber products.
Reach out to our specialists if you have queries about our products.
Certifications & Memberships
Technical Specification
Technical Specifications: IS 15652- X-Volt Insulating Mats
| Characteristics | Values |
|---|---|
| Material Composition | Elastomer free from any insertion. |
| Tensile Strength (Min.) | 15N/mm2 |
| Elongation at Break (Min.) | 250% |
| Leakage Current (Max.) | 10 mA |
| Insulation Resistance With Water When Tested At 5000 V (Min.) | 1,00,000 MΩ |
| Flame Retardance (Max.) | Extinguishes Within 5 Secs |
| Aging Properties At 70 ± 1°C For 168 Hours | T.S & E.B Not Less Than 75% Of Original Value |
| Acid, Alkali & Oil Resistance | T.S & E.B Not Less Than 80% Of Original Value |
| Working Temperature | -10°C To 55°C |
| Tolerance Level | ±10% on thickness, ± 15 mm on width & length up to 600 mm and ± 20 mm for higher. |
Technical Specifications: IEC 61111:2009 Insulating Mats
| Characteristics | Values |
|---|---|
| Material Composition | Elastomer free from any insertion. Typically, a combination of natural rubber and other synthetic polymers. |
| Mechanical Puncture Resistance (min) | 70 N |
| Slip Resistance (min) | 50 N |
| Ageing Properties at 70±2°C for 168 hours | Mechanical Puncture Resistance not less than 80% of original value |
| Flame Retardance | Does not catch fire |
| Low Temperature Test at - 25±3°C | No visible tear, cracks or breaks |
| Acid Resistance | Mechanical Test Values not less than 75% of original value |
| Oil Resistance | Mechanical Test Values not less than 75% of original value |
| Working Temperature | -25°C to 55°C |
| Tolerance Limit: | ± 10% on thickness, ± 2% on length & width |
Technical Specifications: ASTM D178 Insulating Mats
| Characteristics | Values |
|---|---|
| Material Composition | Elastomer free from any insertion. |
| Tensile Strength (Min.) | 15N/mm2 |
| Elongation at Break (Min.) | 250% |
| Leakage Current (Max.) | 10 mA |
| Insulation Resistance With Water When Tested At 5000 V (Min.) | 1,00,000 MΩ |
| Flame Retardance (Max.) | Extinguishes Within 5 Secs |
| Aging Properties At 70 ± 1°C For 168 Hours | T.S & E.B Not Less Than 75% Of Original Value |
| Acid, Alkali & Oil Resistance | T.S & E.B Not Less Than 80% Of Original Value |
| Working Temperature | -10°C To 55°C |
| Tolerance Level | ±10% on thickness, ± 15 mm on width & length up to 600 mm and ± 20 mm for higher. |
Duratuf Electrical Insulating Rubber Mats: More Details
Applications of Duratuf Rubber Mat for Electrical Safety
The Duratuf electric rubber mats are used in power distribution rooms, control rooms, maintenance bays, and switchgear rooms near:
- Switchgear
- Transformers
- Circuit Breakers
- Control Panels
- Motor Control Centers (MCC)
- Generators
- Power Distribution Units (PDU)
- Battery Chargers
- Inverters
- Elevator Control Systems
Exclusive Features Of Duratuf Electrical Insulation Mats
High Di-electric Strength
Quality-Certified
Safety-Audit Passed
Chemical, UV, Ozone and Flame Retardant
Moisture and Water Resistant
Up to 10,000 sq m Ready Stock
Free Expert Guidance
Competitive Pricing
End-to-End Customer Support
FAQs: Rubber Matting for Electrical Switch Room
Customer Reviews
Excellent products with Exception Service from Mr.Tapabrata !!!
We have had some inquiries for Electrical Mats and they have given us good response to it. Their quality is at par with the European and American products and would definitely recommend it.
Good Customer support and Product.
We purchased Electrical Insulation Rubber mats for our Project in Doha. Had a good Experience with Mr. Tapabrata who supported till delivery. We can say with confidence that this mat is good and durable. Recommended!
Our Clientele
ELECTRICAL SAFETY BLOGS
Our Insulating Mats are available in Jakarta, Surabaya, Bandung, Medan, Palembang, Semarang, Makassar, Pekanbaru, Padang, Samarinda and all over the Indonesia.