The Electrical Safety Topics 2020 is a goal you will find set by many industrial sites globally. 2019 saw a spike in electrical hazards on job sites. And, when it comes to electrical safety in factories and warehouses;

Your electrical safety depends on how safe your equipment is, how safe you have made the environment. And, finally, whether you practice safety work procedures or not.

Ensuring electrical safety through updated electrical insulating mats, rubber gloves, and PPE ( Personal Protective Equipment ) needs to be your priority.

Basic Electrical Safety Topics

You will find the OSHA regulation regarding electrical safe practices stating two important basic points.

However, the first is that live parts shall be de-energized before working on or near them.

Secondly, you need to note that even after the exposed parts have been de-energized, you treat them as energized. Until they are locked out and/or out.

ALL ELECTRICAL CIRCUIT CONDUCTORS, BARE OR INSULATED, ARE ASSUMED TO BE ENERGIZED UNTIL PROVEN OTHERWISE. THEY SHALL BE DE-ENERGIZED, LOCKED OUT AND TESTED FOR THE ABSENCE OF VOLTAGE BEFORE WORKING ON THEM OR WORKING NEAR THEM. WORK ON ELECTRICAL CIRCUIT CONDUCTORS MAY ONLY BE PERFORMED BY QUALIFIED PERSONNEL WHO HAVE BEEN AUTHORIZED TO DO THE WORK.

However, as any other preventive process, cross checking is vital, and you should always cross check your safety gears. In addition, electrical insulating mats, the rubber Personal Protective Equipment etc.

The easiest way you can stay safe is if you de-energize the conductors to be worked on or near. In addition to that, you must assure that they cannot be re-energized.

In other words, placing the conductors in an electrically safe work condition should always be your priority. Your guide to electrical safety largely depends on your knowledge on how it occurs.

Electrical Safety Topics Review Process

There are many different things you should do to help improve the overall electrical safety of a facility.

You must know that the area layout is very important for you. Knowing that electrical dangers can happen just about anywhere is your first step.

Knowing the BIG risks, however, isn’t always as easy as it sounds.

How to Ensure Electrical Safety in a Warehouse

Electrical Safety

Education

Electrical Safety Topics 2020

Undoubtedly electrical wires and other potential areas of risk throughout the facility, however, you must have everyone working together. In identifying risks. All that starts with you educating electrical safety among workers.

If there is a frayed electrical cord, you must report it to the safety team right away.

If you see electrical cords going through the surface, you need to also inform your nearest electrical safety team. While you help people on what they need to report and to whom is an excellent place to start.

Frequent

Electrical Inspections

Electrical Safety Topics 2020

You need scheduled safety inspections is another important step for electrical safety. In addition, it is best to just include the electrical safety checks in with other standard inspections.

This will help you to ensure it can be done on a regular basis. Moreover, this way you can eliminate the waste that would come with having multiple different inspections. However, live equipment needs almost a weekly inspection to ensure that your operators are safe.

Standardised

Electrical Safety Rules

Electrical Safety Topics 2020

An easy way for you to prevent electrical problems is to have electrical safety standards in facilities.

Moreover, rather than using extension cords to get power where it is needed, a facility should run a proper electrical outlet to the location.

This can prevent accidents as well as make it more convenient. You need to have power cords run according to approved standards will also reduce the chances electrical fatalities.

In addition, the use of electrical safety signage in all areas containing electrical hazards will help you communicate better.

This helps you maintain a standard of electrical safety. While your employees are urged to use proper caution in such areas and are familiar with the designated signage.

Symptoms

ALERT

Electrical Safety Topics 2020

You will see that sometimes; an electrical accident has persisting symptoms. For example, an area is going through light bulbs much more quickly than they should. This means that you need to check the electrical issues in that area.

Checking the electricity in that area will not only help you reduce the expense of replacing the bulbs. In addition, it will help you protect workers and equipment.

Electrical Safety Equipment

While you can say that people incur electrical fatalities when they are expecting it at least. Yet, when you are aware of the live equipment you are working on, you are more prone to injuries.

However, all of this can be dealt with the implementation of the right kind of electrical safety equipment. Types of welding machines use high voltage electricity. Even circuit rooms too, are areas you need to be prepared.

So, when it comes to electrical safety equipment, here are the things you will need.

Rubber Gloves

To prevent electrical fatalities, you need your live operators adhering to the personal protective equipment like rubber gloves.
The non-conductive rubber gloves come with a proper standard which is easy to store and use.

Full-Body Protection

There is full-body rubber gear that is designed for your live operators walking into high-risk areas in a facility. You can always have such PPE designed for your live operators who are working in exposed circuit rooms as such.
Moreover, this will also ensure extensive electrical safety.

Electrical Insulating Mats

The standard of your electrical insulating mats will depend on your country standard. For example, if you are residing in the USA then ASTM-D-178 switchboard matting will be the safety standard for your mats.

If you are in the UAE, UK and globally situated then IEC61111 electrical rubber mats will be your standard. And if you are residing in India then the electrical insulating mats standard is IS 15652:2006.

In other words, what you need is a quality complied non-conductive electrical rubber mat that is used to secure the live equipment form the surface.
Ensuring that your live operators don’t get electrocuted from surface top.

In fact, if you are looking for more information on electrical safety, feel free to go through our 8 Tips to Keep Your Workplace safe.

Final Thoughts 

Your electrical safety topics 2020 at your facility will largely depend on how well places your safety equipment is. Moreover, electrical safety assurance is an on-going process for workplaces.

Which needs regular safety inspections, audits and mostly training of your workers. Especially, training them on what they must do in case of an electrical hazzard.

Electrical Insulating Mats are one of the most cost-effective ways factories and warehuses can make it safer for their live operators. You can assure the safety and save costs in terms of accidents.

All you have to do is regularly inspect your area, follow the safety audit standards of your electrical insulating mats and educate your taskforce in terms of electrical safety. You can also go through our Electrical Insulating Mats Buyer’s Guide for more details.

To talk to an electrical insulating mats expert you can always call us at +91-80888-77444. Or leave us a query at inquiry@duratufproducts.com.