Duratuf Electrical Safety Mats (AS/NZS 2978:1995)
AZ/NZS Compliant | Test Certificate On Supply | High Voltage Resistant
Overview: Electrical Safety Mats (ASNZS 2978)
Duratuf Electrical Safety Mats (AS/NZS 2978) are available in two classes – Class A (Thicker Mats) for general purpose application & Class B (Light Weight) for use on flat indoor surfaces only. Both types are intended to protect personnel where circumstances involve the possibility of contact with conductors or electrical equipment whose voltage does not exceed 650 V a.c. r.m.s. or d.c.
These electrical insulating mats are manufactured as per the AS/NZS 2978:1995 standard set by the Joint Standards Australia/New Zealand Committee EL/4. We guarantee standard conformity to ensure protection from electrical shock. The manufacturer’s Test Certificate is provided along with the supply certifying the same.
Duratuf is a reliable and well-known supplier of electrical safety mats used as switchboard matting in front of electrical switches and control panels. They are also available in finely ribbed top and textured bottom, or with both sides anti-skid textured surface. Along with the AS/NZS 2978 Rubber Mats we also supply the IEC 61111 Electrical Rubber Mats and ASTM D178 Switchboard Mats suitable for Electrical Control Panels having working voltage from 1.0 KV to 36.0 KV.
FAQs: Electrical Safety Mats (ASNZS 2978)
Overview: Electrical Safety Mats (ASNZS 2978)
Duratuf Electrical Safety Mats (AS/NZS 2978) are available in two classes – Class A (Thicker Mats) for general purpose application & Class B (Light Weight) for use on flat indoor surfaces only. Both the types are intended to protect personnel where circumstances involve the possibility of contact with conductors or electrical equipment whose voltage does not exceed 650 V a.c. r.m.s. or d.c.
These electrical insulating mats are manufactured as per the AS/NZS 2978:1995 standard set by the Joint Standards Australia/New Zealand Committee EL/4. We guarantee standard conformity to ensure protection from electrical shock. Manufacturer’s Test Certificate is provided along with the supply certifying the same.
Duratuf is a reliable and well-known supplier of electrical safety mats used as switchboard matting in front of electrical switches and control panels. They are also available in fine ribbed top and textured bottom, or with both sides anti-skid textured surface. Alongwith the AS/NZS 2978 Rubber Mats we also supply the IEC 61111 Electrical Rubber Mats and ASTM D178 Switchboard Mats suitable for Electrical Control Panels having working voltage from 1.0 KV to 36.0 KV.
FAQs: Electrical Safety Mats (ASNZS 2978)
Special Features of Duratuf AS/NZS 2978 Insulating Mats
Related Blogs: ASNZS 2978 Safety Mats
IEC61111 is the standard stipulated for electrical safety flooring standards in the United Kingdom, Europe, and the [...]
If you are looking for a cost-effective long-term solution for a shock-free workstation with live equipment, [...]
Making a purchase of the rubber mats for electrical purposes is simply the first step that [...]
Technical Information: Electrical Safety Mats (AS/NZS 2978)
Product Code | Class | Minimum Thickness | Working Voltage | AC Proof Voltage | Weight per m2 |
---|---|---|---|---|---|
ASNZ 001 | A | 6.0 mm | 650 V | 15.0 KV | 10.0 Kgs |
ASNZ 002 | B | 3.0 mm | 650 V | 15.0 KV | 5.0 Kgs |
Characteristics | Values |
---|---|
Material Composition | Elastomer free from any insertion. Typically, a combination of natural rubber and other synthetic polymers. |
Antiskid Design | Our standard design is both side antiskid textured surface finish. However, top side fine ribbed design is also available on request. |
Electrical Insulation | 160 mA/m2 (max.) |
Tear Resistance | 18 N/mm (min.) |
Tensile Strength (T.S.) | 5.0 MPa (min.) |
Elongation at Break (E.B.) | 200% (min.) |
Compression Set at 23±2°C for 24hrs. | 10% (max.) |
Working Temperature | -10°C to 55°C |
Standard Size & Design | 1) 1.0 Mtr. Wide x 10.0 Mtr. Long. 2) 1.2 Mtr. Wide x 10.0 Mtr. Long. 3) 0.9 Mtr. Wide x 0.9 Mtr. Long. |
Custom Size & Design | Max. width upto 2400mm & length upto 20M available in Texture Design only. |
Standard Colour | Black & Grey without Metallic Derivatives. |
Manufacturing Tolerance | ±10% on thickness, ±5% on length, ±2% on width. |