Electrical Insulating Rubber Mats in Nigeria

(As per IEC 61111:2009 & ASTM D178)

Duratuf Insulation mat is highly electrical resistant as well as non-conductive in nature. These electrical rubber mats are ideal safety measurements for workers, electricians, and operators to protect themselves from any electrical mishap. As it is generally placed near electric panels and switchboards, it is also referred to as switchboard matting. Duratuf is one of the best electrical rubber mat manufacturers in Nigeria and has earned a credential for supplying durable Insulating mats in Nigeria. We are not only one of the most trustworthy Insulating Rubber Mat Exporters in Nigeria but also a reputed name to provide insulation mats in domestic and international markets. Besides electrical rubber mat suppliers in Nigeria, we export these electrical insulating rubber mats to 35 countries. Being a leading Insulating Rubber Mat Company in Nigeria, we manufacture electrical safety mats with a certification of IEC standard 61111:2009 and ASTM D178. These insulating rubber mats in Nigeria are considered personal protective equipment which safeguards the workers from disaster caused by the malfunctions of the high-voltage electric panels. Our Electrical Matting is 100% electrical shock resistant. As one of the best Rubber mat dealers in Nigeria, we scrutinize the mats repeatedly to ensure the activeness of all the properties. Our manufacturing team land on the advanced German technology to export supreme quality Insulated Mats In Nigeria. We also inspect the products to crosscheck whether the electrical rubber mats meet all the specifications or not. This Safety floor matting is water and moisture resistant that boasts of long shelf life. Duratuf Insulating Mats are also alkali, diesel, acid, and transformer oil resistant. We are open to customising colour, cut lengths, and shapes upon request. We serve the manufacturer’s test certificate while delivering Insulating rubber mats in Nigeria. Duratuf Insulating Mats are manufactured according to two international standards as follows:

  • IEC 61111:2009 standard stated by the International Electro-Technical Commission 
  • ASTM D178 standard is controlled by the American Society for Testing and Materials 

Duratuf Electrical Insulation Mats

(As per IEC 61111:2009)

 Duratuf electrical insulation mats are high in demand in Nigeria for their electrical shock resistance capabilities. Electrical rubber mat dealers in Nigeria provide this electrical insulation matting as a protective gear while working on electrical installation. Being non-conductive, electrical insulating mats are an effective protective shield for the workers, technicians, operators, and engineers from any electrical disaster originating from the high-voltage electrical apparatus. As a leading Electrical rubber mat manufacturer in Nigeria, we take pride in providing premium grade Insulation mats in Nigeria for years. Duratuf is a trustworthy brand for manufacturing and supplying insulation mats according to the IEC standard 61111:2009 operated by the International Electro-technical Commission. We recommend buying an Electric mat in Nigeria having 2mm to 4mm thickness with an anti-skid textured design on both top and bottom surfaces. Besides, we also supply the electrical insulation mats in a fine-ribbed design with 3mm to 5mm thickness. It is to be noted that we are also ready to customize the insulation mats according to the requirements of our clients in Nigeria. Cut lengths, colour, and custom shapes are available to us upon request. However, unlike other rubber insulation suppliers in Nigeria, electrical insulation mats are also available to us in higher thicknesses. We are also open to customising the mats depending upon the required working voltage. Duratuf electrical insulation mats are water and moisture-resistant, which guarantees long functional life. Moreover, these mats are also oil, acid, and fire-resistant. As the rubber mat manufacturers in Nigeria, we offer the test certificate along with the mats at the delivery time. 

Duratuf Insulating Matting 

(As per ASTM-D-178)

Duratuf insulating rubber matting is high-voltage electric resistant and non-conductive in nature. This substation’s rubber matting protects the workers, electricians, operators, and engineers from the electrical disaster caused by the malfunction of the electrical equipment. Being one of the trustworthy electrical insulating mat suppliers in Nigeria, we manufacture and provide the best quality insulating matting to our clients in Nigeria. We manufacture mats that comply with the ASTM D 178 standard stated by the American Society for Testing and Materials. You can use this mat in both the indoor and outdoor regions of the electrical industry. Duratuf’s wide range of rubber mats is ideal for placing in the electric substations, in front of the switchboard, electric panels, etc. For ASTM D 178, we usually recommend 3.2mm to 12.7 mm thickness. However, this thickness relies upon the required voltage resistance of the electrical insulating matting. As an electrical insulating mat manufacturer in Nigeria, we offer both fine-ribbed and anti-skid textured designs on the upper and lower surface. Our Type-I grade electrical rubber mats are water and moisture-resistant, which comes along with a long functional life. On the other hand, our Type-II grade insulating rubber mats are also high in demand in Nigeria for their flame, oil, and ozone resistance properties. Unlike most rubber mat dealers in Nigeria, we are available to customize the mats in colours, cut lengths, and custom shapes upon request. We are one of the dependable rubber mat manufacturers in Nigeria that offer manufacturer’s test certificate while delivering the insulation mats.

Want An Immediate Custom Quote?

The pricing of our electrical insulating mats is very affordable and competitive.

Only takes a few seconds!

Electrical Insulation Mats IEC 61111 

Duratuf electrical insulation mats are very effective protective equipment that is a must to install in the workplace, especially near high-voltage electrical apparatuses.

We manufacture electric mats according to the standard IEC 61111:2009 set by the International Electro-Technical Commission.

We are a renowned Rubber Mat Dealer in Kuwait, and our goal is to protect workers, electricians, and operators from devastating electrical shocks while operating electrical gadgetry.

As these electrical insulation mats are non-conductive in nature, they are 100% shock-resistant. Hence, it is the ideal safety measurement to place it near the electrical panels, in front of switchboards, high-voltage electrical apparatus, and near HT/LT control rooms.

Are you looking for electrical insulation mat suppliers in Kuwait for multiple designs and colors? Then you are at the right place as we take pride in exporting supreme quality insulation mats in a couple of designs and colors. 

These insulated mats in Kuwait are available in different sizes and designs. We recommend using insulating mats having 2mm to 4 mm thickness coupled with the anti-skid design on both the top and bottom surfaces. Moreover, fine-ribbed designs are also available to us in 3mm to 5mm thickness.

However, we are always open to customizing the mats according to our client’s requirements and depending upon the required working voltage resistance.

The workers need insulated mats in Kuwait to get a solid grip against the footfall. The insulation mats from the house of Duratuf provide an anti-skid design. Electrical rubber mat dealers in Kuwait provide these kinds of mats to protect workers from any accident due to slippage.

Electrical insulating mats exported by Duratuf are moisture and water-resistant that guarantees long functional life. Added to that, they are also oil, acid, and fire-resistant. The mats supplied by the electrical rubber mat manufacturer in Kuwait like us extinguish the fire within a few seconds. Besides, the insulation mats have an excellent elongation at break capability.

It is to be noted that at the delivery time, we provide the manufacturer’s test certificate along with the electrical insulation mats.

 

Let’s check out the features of Duratuf Electric Insulation Mats

Moisture and Water Resistant-

The electrical insulation mats manufactured by us are water and moisture-resistant. Our insulation mat in Kuwait is high in demand among the operators for its long functional life.

Chemical and Flame Retardant-

We manufacture our electrical insulation mats with special compounds and formulations making them acid, oil, and alkali resistant and flame retardant.

Variations in Colours and Designs-

As one of the best rubber insulation suppliers in Kuwait, we offer insulation mats in both black and grey colors. Comes to the design of these electrical insulation mats, we have two variations, including the fine ribbed and both side textured anti-skid design.

Safety Audit Complaint-

Being an electrical insulating mat manufacturer in Kuwait, we undergo inspection several times to supply you with IEC 61111 accommodating electrical safety mats approved by the government and the safety audit agencies. 

100% Electrical Shock Resistant-

As Insulation Mat Suppliers, we prioritize quality and performance. We crosscheck all our manufactured electrical insulation mats before shipping them to our clients in Kuwait.

We recommend the insulating mats as per IEC 61111 ranging from 2mm to 4mm thickness with anti-skid textured on both the bottom and top surface. However, insulating mats in higher thickness can also be customised depending upon the working voltage resistance required.

We also provide electrical insulation mats with a fine-ribbed design that comes in minimum 3mm thickness for upto Class 0 to 2 and in 4.5~5mm thickness for Class 3-4. If you require in higher thickness, we can also customise the same for you in black and grey colour.

The thickness recommended by the ASTM D178 standard is usually 3.2mm to 12.7 mm. The thickness depends upon the working/use voltage resistance of the electrical rubber mats. Electrical rubber mats (Type-I grade) are moisture and water resistant. Our standard antiskid design is both side textured surface.

Type-II grade insulating rubber mats offer some additional properties like flame, ozone, and oil resistance in both side antiskid textured surface. In can also be customised with individual properties or combination of properties.

We offer the switchboard matting in fine ribbed top surface design and bottom textured surface. These switchboard matting can be manufactured in both Type I & Type II-ABC ASTM D178 standard.

Product CodeClassRecommended
Thickness
Max Thickness
Allowed
Working VoltageAC Proof
Voltage
Di-electric Strength
Weight per m 2
Both Side Fabric Surface Finish (Standard)
IEC 00102.0 mm6.0mm1.0 KV5.0 KV10.0 KV3.2 Kgs
IEC 00212.0 mm6.0mm7.5 KV10.0 KV20.0 KV3.2 Kgs
IEC 00323.0 mm8.0mm17.0 KV20.0 KV30.0 KV4.8 Kgs
IEC 00433.0 mm11.0 mm26.5 KV30.0 KV40.0 KV4.8 Kgs
IEC 00544.0 mm14.0 mm36.0 KV40.0 KV50.0 KV6.4 Kgs
IEC CD
(Custom)
-Upto 14.0 mmUpto 14.0 mmUpto 36.0 KVUpto 40.0 KVUpto 50.0 KV-
Fine Ribbed Top & Textured Bottom Surface (On Request)
IEC RB 0010-23.0 mm8.0 mm17.0 KV20.0 KV30.0 KV4.5 Kgs
IEC RB 0023-45.0 mm14.0 mm36.0 KV40.0 KV50.0 KV7.5 Kgs
CharacteristicsValues
Material CompositionElastomer free from any insertion. Typically, a combination of natural rubber and other synthetic polymers.
Mechanical Puncture Resistance70 N (min.)
Slip Resistance50 N (min.)
Ageing Properties at 70±2°C for 168 hours.Mechanical Puncture Resistance not less than 80% of original value.
Flame RetardanceDoes not catch fire.
Low Temperature Test at -25±3°CNo visible tear, crack or break.
Acid ResistanceMechanical Test Values not less than 75% of original value.
Oil ResistanceMechanical Test Values not less than 75% of original value.
Working Temperature-25°C to 55°C
Custom Size & DesignMax. width upto 2400mm, length upto 20M and thickness upto 25mm available in Texture Design only.
Manufacturing Tolerance±10% on thickness, ±2% on length & width.
Standard ColourBlack & Grey without Metallic Derivatives.
Standard Size & Design1) 1.0 Mtr. Wide x 10.0 Mtr. Long.
2) 1.2 Mtr. Wide x 10.0 Mtr. Long.

Electrical Insulation Mats ASTM D-178 

Duratuf insulating matting is highly electrical resistant protective gear used for industrial purposes. Our insulating matting is manufactured, maintaining all the criteria that align with the standard ASTM-D-178 set by the American Society for Testing and Materials. 

 Being non-conductive, our insulating rubber matting is essential to safeguard the workmen, operators, electricians, and engineers from any kind of electrical hazards. 

 As one of the best electrical rubber mat manufacturers in Kuwait, the thickness suggested by the ASTM-D-178 standard is generally ranging from 3.2mm to 12.7mm. However, the thickness varies from the working voltage resistance of the insulating rubber mats. 

Besides the thickness, duratuf’s insulated mats in Kuwait are available in two designs fine-ribbed and anti-skid textured design. 

Our Type-I electrical rubber mats are water and moisture-resistant assuring a long functional life whereas the Type-II grade insulated rubber mats are known for oil, flame, and ozone resistance.

However, customization is also entertained by us in custom shapes, colors, and cut lengths. It must be noted that we provide the manufacturer’s test certificate along with the required customized Insulating rubber mats of Duratuf at the delivery time.

Features of Duratuf ASTM-D-178 Insulating Matting-

 Ozone, Oil, and Flame Resistant-

 Are you working in a workplace that is susceptible to excessive oil usage? If it has exposure to the ozone and flame, then our Insulating matting must be installed there. 

100% Electric Shock Resistant-

 We inspect our insulating rubber mats thoroughly at the working voltage our clients required before shipping. Hence, be assured of its electrical shock resistance capability. The installation of these mats protects you from any electrical mishaps. 

Safety Audit Consideration-

Duratuf considers all the safety testing parameters approved by the Safety audit agencies and the Government and supplies you with the ASTM-D-178 marked insulating matting accordingly. 

Manufacturer’s Test Certificates at the Delivery Time-

We always provide the manufacturer’s test certificate to ensure top-notch quality performance. We make sure you receive it right at the time of delivery of these safety mats. 

Design Variations-

Our insulating matting is available in a couple of design variations including the fine-ribbed top design and the anti-skid textured on both the upper and the lower surface. 

Quick Shipping-

Duratuf has ready-stock inventory, a large dealer network, and multi-location warehouses ensuring express delivery of the insulating matting in Kuwait. 

We recommend the insulating mats as per IEC 61111 ranging from 2mm to 4mm thickness with anti-skid textured on both the bottom and top surface. However, insulating mats in higher thickness can also be customised depending upon the working voltage resistance required.

We also provide electrical insulation mats with a fine-ribbed design that comes in minimum 3mm thickness for upto Class 0 to 2 and in 4.5~5mm thickness for Class 3-4. If you require in higher thickness, we can also customise the same for you in black and grey colour.

The thickness recommended by the ASTM D178 standard is usually 3.2mm to 12.7 mm. The thickness depends upon the working/use voltage resistance of the electrical rubber mats. Electrical rubber mats (Type-I grade) are moisture and water resistant. Our standard antiskid design is both side textured surface.

Type-II grade insulating rubber mats offer some additional properties like flame, ozone, and oil resistance in both side antiskid textured surface. In can also be customised with individual properties or combination of properties.

We offer the switchboard matting in fine ribbed top surface design and bottom textured surface. These switchboard matting can be manufactured in both Type I & Type II-ABC ASTM D178 standard.

Product CodeClassThicknessWorking VoltageAC Proof
Voltage
Di-electric Strength
Weight per m2
ASTM 00103.2 mm1.0 KV5.0 KV6.0 KV5.0 Kgs
ASTM 00214.8 mm7.5 KV10.0 KV20.0 KV7.5 Kgs
ASTM 00326.4 mm17.0 KV20.0 KV30.0 KV10.0 Kgs
ASTM 00439.5 mm26.5 KV30.0 KV40.0 KV15.0 Kgs
ASTM 005412.7 mm36.0 KV40.0 KV50.0 KV20.0 Kgs
ASTM CD
(Custom)
-Upto 25.0 mmUpto 36.0 KVUpto 40.0 KVUpto 50.0 KV-
CharacteristicsValues
Type-IType-II
Material CompositionElastomer free from any insertion. Typically, a combination of natural rubber and other synthetic polymers.
Antiskid DesignOur standard design is both side antiskid textured surface finish. However, top side fine ribbed design is also available on request.
Tensile strength (T.S.)4.83 Mpa (min.)
Elongation at Break (E.B.)250% (min.)
Ageing Properties at 70±1°C for 168 hours.Tensile strength not less than 50% of original value.
Moisture Absorption1.5% (max.)3.0% (max.)
Ozone Resistance (Type IIA)N.A.No visible effect.
Flame Resistance (Type IIB)N.A.12.7 mm height max. after 30 secs.
Oil Resistance (Type IIC)N.A.4% max. volume increase.
Standard Size & Design1) 1.0 Mtr. Wide x 10.0 Mtr. Long.
2) 1.2 Mtr. Wide x 10.0 Mtr. Long.
Custom Size & DesignMax. width upto 2400mm, length upto 20M and thickness upto 25mm available in Texture Design only.
Standard ColourBlack & Grey without Metallic Derivatives.
Manufacturing Tolerance±10% on thickness, ±2% on length & width.
TypeUnless specified, insulating matting shall be supplied as per Type I grade. Also available on request, Type II grade (A-Ozone Resistance, B-Flame Resistance, C-Oil Resistance) with combination of all three or individual properties.

Want to Buy Insulating Mats for Reselling?

Check out the amazing benefits of being a Duratuf Channel Partner.