Duratuf Electric Shock-Proof Mats: An Overview
Duratuf’s electrical insulating rubber mats are widely recognized as highly effective protective gear. Safety equipment is mandatory in industrial setups for better worker safety and productivity. Duratuf electrical rubber mats, here, are used to reduce the number of electrical accidents from powerful machines. Users in Kuwait also refer to this product as electrical safety mats, dielectric mats, or insulating mats because of their electrical insulating properties.
We offer IEC 61111:2009, ASTM D178, and IS 15652 electrical insulating rubber mats in Kuwait. While the IEC 61111 mats are popularly used here, you can also buy the ASTM D178 or IS 15652 for reselling and regular use.
Our mats are made of the best quality dielectric rubber (elastomer). They have no insertion in them that can damage the protective cover of an insulating mat. Moreover, the mats are durable and can withstand the extreme climate of the Middle East. The electrical insulating rubber mats are tested for flame retardance, chemical-Ozone-UV-oil-moisture resistance, and dielectric strength. Furthermore, our specialists check the surfaces of each piece of the dielectric mats visually for pinholes, cracks, tears, and warping. Once the testing is completed, the Duratuf electrical safety mats are certified ‘fit for use’.
We have supplied our electrical insulating mats for major projects in the Kuwait Small Boat Harbor, Kuwait Oil Company, and many more industries. From oil refineries to mineral extraction units and mining to construction- Duratuf electrical matting is highly preferred by Kuwaitian companies.
Why Buy Duratuf Electrical Insulating Mats?
- Anti-aging and Weather-resistant: Performs reliably in extreme environmental conditions
- High Voltage Protection: Perfect for use in areas with high-voltage electrical equipment.
- Wide range of options: Duratuf offers IEC 61111, ASTM D178, and IS 15652 insulating mats under one roof
- Anti-Slip surface: The textured bottom and upside save workers from falls and slips- significantly
Discover the technical specifications of Duratuf IEC 61111:2009 electrical rubber mats below:
Certifications & Memberships
Technical Specification
Technical Specifications: IS 15652- X-Volt Insulating Mats
| Characteristics | Values |
|---|---|
| Material Composition | Elastomer free from any insertion. |
| Tensile Strength (Min.) | 15N/mm2 |
| Elongation at Break (Min.) | 250% |
| Leakage Current (Max.) | 10 mA |
| Insulation Resistance With Water When Tested At 5000 V (Min.) | 1,00,000 MΩ |
| Flame Retardance (Max.) | Extinguishes Within 5 Secs |
| Aging Properties At 70 ± 1°C For 168 Hours | T.S & E.B Not Less Than 75% Of Original Value |
| Acid, Alkali & Oil Resistance | T.S & E.B Not Less Than 80% Of Original Value |
| Working Temperature | -10°C To 55°C |
| Tolerance Level | ±10% on thickness, ± 15 mm on width & length up to 600 mm and ± 20 mm for higher. |
Technical Specifications: IEC 61111:2009 Insulating Mats
| Characteristics | Values |
|---|---|
| Material Composition | Elastomer free from any insertion. Typically, a combination of natural rubber and other synthetic polymers. |
| Mechanical Puncture Resistance (min) | 70 N |
| Slip Resistance (min) | 50 N |
| Ageing Properties at 70±2°C for 168 hours | Mechanical Puncture Resistance not less than 80% of original value |
| Flame Retardance | Does not catch fire |
| Low Temperature Test at - 25±3°C | No visible tear, cracks or breaks |
| Acid Resistance | Mechanical Test Values not less than 75% of original value |
| Oil Resistance | Mechanical Test Values not less than 75% of original value |
| Working Temperature | -25°C to 55°C |
| Tolerance Limit: | ± 10% on thickness, ± 2% on length & width |
Technical Specifications: ASTM D178 Insulating Mats
| Characteristics | Values |
|---|---|
| Material Composition | Elastomer free from any insertion. |
| Tensile Strength (Min.) | 15N/mm2 |
| Elongation at Break (Min.) | 250% |
| Leakage Current (Max.) | 10 mA |
| Insulation Resistance With Water When Tested At 5000 V (Min.) | 1,00,000 MΩ |
| Flame Retardance (Max.) | Extinguishes Within 5 Secs |
| Aging Properties At 70 ± 1°C For 168 Hours | T.S & E.B Not Less Than 75% Of Original Value |
| Acid, Alkali & Oil Resistance | T.S & E.B Not Less Than 80% Of Original Value |
| Working Temperature | -10°C To 55°C |
| Tolerance Level | ±10% on thickness, ± 15 mm on width & length up to 600 mm and ± 20 mm for higher. |
Duratuf Electrical Insulating Rubber Mats: More Details
Applications of Duratuf Rubber Mat for Electrical Safety
The Duratuf electrical rubber mats are used in and near:
- Electrical Control Rooms
- Transformer Rooms
- Motor Control Centers
- Temporary Electrical Installations
- Electrical Utility Poles
- HT-LT Panels
- Switchgear Rooms
- Areas With Exposed Electrical Conductors, etc
If you want to know the application areas of our electrical rubber mats in detail, contact us to talk to our specialists.
Exclusive Features Of Duratuf Electrical Insulation Mats
High Di-electric Strength
Quality-Certified
Safety-Audit Passed
Chemical, UV, Ozone and Flame Retardant
Moisture and Water Resistant
Up to 10,000 sq m Ready Stock
Free Expert Guidance
Competitive Pricing
End-to-End Customer Support
FAQs: Rubber Matting for Electrical Switch Room
Customer Reviews
Excellent products with Exception Service from Mr.Tapabrata !!!
We have had some inquiries for Electrical Mats and they have given us good response to it. Their quality is at par with the European and American products and would definitely recommend it.
Good Customer support and Product.
We purchased Electrical Insulation Rubber mats for our Project in Doha. Had a good Experience with Mr. Tapabrata who supported till delivery. We can say with confidence that this mat is good and durable. Recommended!
Our Clientele
ELECTRICAL SAFETY BLOGS
Our Insulating Mats are available in Kuwait City, Hawalli, Al Ahmadi, Farwaniya, Al Jahra, Mubarak Al-Kabeer, Sabah Al-Salem, Al Farwaniyah, Jleeb Al-Shuyoukh and all over Kuwait.