Duratuf Electric Shock-Proof Mats: An Overview
Duratuf electrical insulating rubber mats are made of superior quality elastomer which makes them non-conductive. They have a proven dielectric strength. Therefore, if you use the right electrical rubber mat (as per your working voltage), these mats will not fail or break down.
Ideally, you should place the Duratuf electrical insulating mats in areas with high-voltage equipment. In case your worker comes in contact with a live wire, the electrical mats channel static electricity to the ground instead of making it pass through the human body.
Duratuf electrical insulating rubber mats are certified and delivered with updated compliance documents. Therefore, we ensure their efficiency at all times.
Our IEC 61111:2009 and ASTM D178 are specifically popular in Qatar. These electrical insulating rubber mats offer a wide range of voltage protection from 1 kV to 36 kV. Thus, they are the first choice in oil refineries, chemical plants, mineral extraction units, metal processing plants, and construction sites- operating on low-medium and high voltage machines.
We have supplied this safety equipment to the Qatar Metro Railway, Qatar Gas, and many other significant projects. Along with the end-users, resellers of Duratuf products also prefer our electrical mats for getting high ROI.
Why Buy Duratuf Electrical Insulating Mats?
- Weather-resistant: Performs reliably in Qatar’s extreme environmental conditions
- Certified Safety: product Fully tested and certified for use in electrical workplaces
- Durable and Long-lasting: Designed for high wear resistance
- Anti-Slip surface: The textured surfaces reduce workplace accidents
Discover the technical specifications of Duratuf electrical rubber mats below:
Certifications & Memberships
Technical Specification
Technical Specifications: IS 15652- X-Volt Insulating Mats
| Characteristics | Values |
|---|---|
| Material Composition | Elastomer free from any insertion. |
| Tensile Strength (Min.) | 15N/mm2 |
| Elongation at Break (Min.) | 250% |
| Leakage Current (Max.) | 10 mA |
| Insulation Resistance With Water When Tested At 5000 V (Min.) | 1,00,000 MΩ |
| Flame Retardance (Max.) | Extinguishes Within 5 Secs |
| Aging Properties At 70 ± 1°C For 168 Hours | T.S & E.B Not Less Than 75% Of Original Value |
| Acid, Alkali & Oil Resistance | T.S & E.B Not Less Than 80% Of Original Value |
| Working Temperature | -10°C To 55°C |
| Tolerance Level | ±10% on thickness, ± 15 mm on width & length up to 600 mm and ± 20 mm for higher. |
Technical Specifications: IEC 61111:2009 Insulating Mats
| Characteristics | Values |
|---|---|
| Material Composition | Elastomer free from any insertion. Typically, a combination of natural rubber and other synthetic polymers. |
| Mechanical Puncture Resistance (min) | 70 N |
| Slip Resistance (min) | 50 N |
| Ageing Properties at 70±2°C for 168 hours | Mechanical Puncture Resistance not less than 80% of original value |
| Flame Retardance | Does not catch fire |
| Low Temperature Test at - 25±3°C | No visible tear, cracks or breaks |
| Acid Resistance | Mechanical Test Values not less than 75% of original value |
| Oil Resistance | Mechanical Test Values not less than 75% of original value |
| Working Temperature | -25°C to 55°C |
| Tolerance Limit: | ± 10% on thickness, ± 2% on length & width |
Technical Specifications: ASTM D178 Insulating Mats
| Characteristics | Values |
|---|---|
| Material Composition | Elastomer free from any insertion. |
| Tensile Strength (Min.) | 15N/mm2 |
| Elongation at Break (Min.) | 250% |
| Leakage Current (Max.) | 10 mA |
| Insulation Resistance With Water When Tested At 5000 V (Min.) | 1,00,000 MΩ |
| Flame Retardance (Max.) | Extinguishes Within 5 Secs |
| Aging Properties At 70 ± 1°C For 168 Hours | T.S & E.B Not Less Than 75% Of Original Value |
| Acid, Alkali & Oil Resistance | T.S & E.B Not Less Than 80% Of Original Value |
| Working Temperature | -10°C To 55°C |
| Tolerance Level | ±10% on thickness, ± 15 mm on width & length up to 600 mm and ± 20 mm for higher. |
Duratuf Electrical Insulating Rubber Mats: More Details
Applications of the Duratuf Electrical Safety Mats
The Duratuf electrical rubber mats are used in and near:
- Electrical Control Rooms
- Transformer Rooms
- Motor Control Centers
- Temporary Electrical Installations
- Electrical Utility Poles
- HT-LT Panels
- Switchgear Rooms
- Areas With Exposed Electrical Conductors
If you want to know the application areas of our electrical rubber mats in detail, contact us to talk to our specialists.
Exclusive Features Of Duratuf Electrical Insulation Mats
High Di-electric Strength
Quality-Certified
Safety-Audit Passed
Chemical, UV, Ozone and Flame Retardant
Moisture and Water Resistant
Up to 10,000 sq m Ready Stock
Free Expert Guidance
Competitive Pricing
End-to-End Customer Support
FAQs: Electrical Insulating Rubber Mats
Customer Reviews
Excellent products with Exception Service from Mr.Tapabrata !!!
We have had some inquiries for Electrical Mats and they have given us good response to it. Their quality is at par with the European and American products and would definitely recommend it.
Good Customer support and Product.
We purchased Electrical Insulation Rubber mats for our Project in Doha. Had a good Experience with Mr. Tapabrata who supported till delivery. We can say with confidence that this mat is good and durable. Recommended!
Our Clientele
ELECTRICAL SAFETY BLOGS
Our Insulating Mats are available in Doha, Al Wakrah, Al Khor, Al Rayyan, Umm Salal Mohammed, Al Daayen, Al Shamal, Mesaieed and all over Qatar.