Product Description:

We offer Electrical Insulating Mats with BIS marking on the products. These Insulating Mats are generally used for covering the floor below the control panels. These high voltage insulating mats are manufactured as per latest Indian Standard i.e. IS 15652:2006 for electrical insulation. The electrical safety mats are mainly used for safety of workers while installing and operating electrical equipment because of possibility of leakage of current.

The ISI Marked Insulating Mats are manufactured using elastomer (PVC compound) all along with anti-skid aberrations (small dots) on the top to avoid slippage. It is available in 2mm, 2.5mm & 3.0mm thickness depending upon the working/use voltage. CPRI/ERDA Type Test Certificates & BIS License copy is available on request. Manufacturer’s Test Certificate is provided along with the supply.

Application Area:

  • Near HT/LT Control Panels
  • Electrical Substations
  • Transformers, Generator & Lift Rooms
  • In front of Switchboards
  • Around Buss Bars
  • Outdoor/Indoor On-site use on Live Equipment
Blue ISI Marked Insulating Mat
Blue Dotted Design
Black ISI Marked Insulating Mat
Black Dotted Design
Product CodeClassRecommended
Thickness
Max Use /
Working Voltage
AC Proof VoltageDi-electric Strength
(Withstand Voltage)
Approx. Weight
Per Sqr Mtr.
ISI 001A2.0 mm3.3 KV10.0 KV30.0 KV3.2 Kgs
ISI 002B2.5 mm11.0 KV22.0 KV45.0 KV4.0 Kgs
ISI 003C3.0 mm33.0 KV36.0 KV65.0 KV4.8 Kgs
Sl No.CharacteristicsValues
1Material CompositionElastomer free from any insertion. Typically, a combination of rubber and synthetic polymers.
2Tensile strength (T.S.)15N/mm2 (min.)
3Elongation at Break (E.B.)250% (min.)
4Leakage Current10 mA (max.)
5Insulation Resistance with Water when tested at 500 V1,00,000 MΩ (min.)
6Flame RetardanceExtinguishes within 5 secs (max.)
7Ageing Properties at 70±1°C for 168 hours.T.S. & E.B. not less than 75% of original value.
8Acid, Alkali & Oil ResistanceT.S. & E.B. not less than 80% of original value.
9Working Temperature-10°C to 55°C
Sl No.FeaturesValues
1Standard Size & Design1) 1.0 Mtr. Wide x 20.0 Mtr. Long. for 2.0mm & 2.5mm.
2) 1.0 Mtr. Wide x 10.0 Mtr. Long. for 3.0mm.
2Custom Size & Design1.0 Mtr. Wide x Length as per customer requirement subject to availability.
3Standard ColourBlack & Blue without Metallic Derivatives. (Other colours available on request subject to availability)
4Manufacturing Tolerance±10% on thickness, ±5% on length, ±2% on width.
5Fixing at SiteWe undertake fixing at site along with materials subject to certain criteria.

Ordering Information:

  • Class
  • Total Quantity Required
  • Working Voltage
  • Thickness, Length & Width
  • Colour

Note: The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise in writing, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.

Related Products:

Insulating Mats (IS 15652:2006)
Insulating Mats
(IS 15652:2006)

View details

Electrical Rubber Mats (IS 5424:1969)
Rubber Mats
(IS 5424:1969)

View details

Insulation Mats (IEC 61111:2009)
Insulation Mats
(IEC 61111:2009)

View details

Insulation Matting (ASTM-D-178)
Insulating Matting
(ASTM-D-178)

View details

Insulating Matting (AS/NZS – 2978:1995)
Insulation Matting
(AS/NZS 2978:1995)

View details