Product Description:

The insulation matting are manufactured as per the AS/NZS 2978:1995 standard set by the Joint Standards Australia/New Zealand Committee EL/4. These electrical safety matting insulate and protect from mortal shocks generated by electrical equipments. We offer all types of electrical insulating matting including switchboard matting to protect from Electrical shock.

Two classes of mat are available – Class A (Thicker Mats) for general purpose application & Class B (Light Weight) for use on flat indoor surfaces. Both the types of insulating mats as per AS/NZS 2978 standard are intended to protect personnel where circumstances involve the possibility of contact with conductors or electrical equipment whose voltage does not exceed 650 V a.c. r.m.s. or d.c., between conductors or between conductors and earth. Manufacturer’s Test Certificate is provided along with the supply.

Application Area:

  • Near HT/LT Control Panels
  • Electrical Substations
  • Transformers, Generator & Lift Rooms
  • In front of Switchboards
  • Around Buss Bars
  • Outdoor/Indoor On-site use on Live Equipment
Blue Texture Insulating Mats
Blue Texture Design
Black Texture Insulating Mat
Black Texture Design
Product CodeClassRecommended
Thickness
Max Use /
Working Voltage
AC Proof
Voltage
Approx. Weight
Per Sqr Mtr.
ASNZ 001A6.0 mm650 V15.0 KV10.0 Kgs
ASNZ 002B3.0 mm650 V15.0 KV5.0 Kgs
Sl No.CharacteristicsValues
1Material CompositionElastomer free from any insertion. Typically, a combination of natural rubber and other synthetic polymers.
2Electrical Insulation160 mA/m2 (max.)
3Tear Resistance18 N/mm (min.)
4Tensile Strength (T.S.)5.0 MPa (min.)
5Elongation at Break (E.B.)200% (min.)
6Compression Set at 23±2°C for 24hrs.10% (max.)
Sl No.FeaturesValues
1Standard Size & Design1) 1.0 Mtr. Wide x 10.0 Mtr. Long in Texture Design.
2) 1.2 Mtr. Wide x 10.0 Mtr. Long in Texture Design.
3) 0.9 Mtr. Wide x 0.9 Mtr. Long in Texture Design.
2Custom Size & DesignMax. width upto 2400mm & length upto 20M available in Texture Design only.
3Standard ColourBlack & Blue without Metallic Derivatives. (Other colours available on request subject to availability.)
4Manufacturing Tolerance±10% on thickness, ±5% on length, ±2% on width.

Ordering Information:

  • Class
  • Total Quantity Required
  • Working Voltage
  • Thickness, Length & Width
  • Colour

Note: The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise in writing, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.

Related Products:

Insulating Mats (IS 15652:2006)
Insulating Mats
(IS 15652:2006)

View details

ISI Marked Insulating Mats (IS 15652:2006)
ISI Marked Insulating Mats
(IS 15652:2006)

View details

Electrical Rubber Mats (IS 5424:1969)
Rubber Mats
(IS 5424:1969)

View details

Insulation Mats (IEC 61111:2009)
Insulation Mats
(IEC 61111:2009)

View details

Insulation Matting (ASTM-D-178)
Insulating Matting
(ASTM-D-178)

View details