Product Description:

The rubber insulating mattings are manufactured as per the ASTM D 178 standard set by the American Society for Testing and Materials and are highly electrical resistant. These non-conductive rubber mats insulate and protect from mortal shocks generated by high voltage equipment.

The ASTM D 178 standard recommends thickness from 3.2mm to 12.7mm for the electrical insulating rubber mats depending on use/working voltage resistance with anti-skid textured surface on top and smooth lower surface. These safety rubber mats (Type-I grade) are leakage, moisture and water proof that guarantee long functional life. Type-II grade insulating matting offers additional properties such as ozone, flame and oil resistance. Manufacturer’s Test Certificate is provided along with the supply.

Application Area:

  • Near HT/LT Control Panels
  • Electrical Substations
  • Transformers, Generator & Lift Rooms
  • In front of Switchboards
  • Around Buss Bars
  • Outdoor/Indoor On-site use on Live Equipment
Blue Texture Insulating Mats
Blue Texture Design
Black Texture Insulating Mat
Black Texture Design
Product CodeClassRecommended
Thickness
Max Use /
Working Voltage
AC Proof
Voltage
Di-electric Strength
(Withstand Voltage)
Approx. Weight
Per Sqr Mtr.
ASTM 00103.2 mm1.0 KV5.0 KV6.0 KV5.0 Kgs
ASTM 00214.8 mm7.5 KV10.0 KV20.0 KV7.5 Kgs
ASTM 00326.4 mm17.0 KV20.0 KV30.0 KV10.0 Kgs
ASTM 00439.5 mm26.5 KV30.0 KV40.0 KV15.0 Kgs
ASTM 005412.7 mm36.0 KV40.0 KV50.0 KV20.0 Kgs
ASTM CD (Custom)-Upto 25.0 mmUpto 36.0 KVUpto 40.0 KVUpto 50.0 KV-
Sl No.CharacteristicsValues
Type-IType-II
1Material CompositionElastomer free from any insertion. Typically, a combination of natural rubber and other synthetic polymers.
2Tensile strength (T.S.)4.83Mpa (min.)
3Elongation at Break (E.B.)250% (min.)
4Ageing Properties at 70±1°C for 168 hours.Tensile strength not less than 50% of original value.
5Moisture Absorption1.5% (max.)3.0% (max.)
6Ozone Resistance (Type IIA)N.A.No visible effect.
7Flame Resistance (Type IIB)N.A.12.7 mm height max. after 30 secs.
8Oil Resistance (Type IIC)N.A.4% max. volume increase.
Sl No.FeaturesValues
1Standard Size & Design1) 1.0 Mtr. Wide x 10.0 Mtr. Long. in Texture Design.
2) 1.2 Mtr. Wide x 10.0 Mtr. Long. in Texture Design
2Custom Size & DesignMax. width upto 2400mm, length upto 20M and thickness upto 25mm available in Texture Design only.
3Standard ColourBlack & Blue without Metallic Derivatives. (Other colours available on request subject to availability.)
4Manufacturing Tolerance±10% on thickness, ±5% on length, ±2% on width.
5TypeUnless specified, insulating matting shall be supplied as per Type I grade. Also available on request, Type II grade (A-Ozone Resistance, B-Flame Resistance, C-Oil Resistance) with combination of all three or individual properties.

Ordering Information:

  • Class
  • Type
  • Working Voltage
  • Total Quantity Required
  • Thickness, Length & Width
  • Colour

Note: The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise in writing, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.

Related Products:

Insulating Mats (IS 15652:2006)
Insulating Mats
(IS 15652:2006)

View details

ISI Marked Insulating Mats (IS 15652:2006)
ISI Marked Insulating Mats
(IS 15652:2006)

View details

Electrical Rubber Mats (IS 5424:1969)
Rubber Mats
(IS 5424:1969)

View details

Insulation Mats (IEC 61111:2009)
Insulation Mats
(IEC 61111:2009)

View details

Insulating Matting (AS/NZS – 2978:1995)
Insulation Matting
(AS/NZS 2978:1995)

View details