Product Description:

Electrical Insulating Mats are generally used for covering the floor below the control panels. Our High Voltage Insulating Mats are manufactured as per latest Indian Standard i.e IS 15652:2006. The insulating mat that we offer is mainly used for safety of workers while installing and operating electrical equipment because of possibility of leakage of current.

These insulating mats are manufactured using elastomer (latex, rubber and elastomeric compounds that might be natural, synthetic or mixture of both) all along with anti- skid aberrations on the top to avoid slippage and smooth lower surface. It is available in 2mm, 2.5mm & 3.0mm thickness depending upon the working/use voltage. Manufacturer’s Test Certificate is provided along with the supply.

Application Area:

  • Near HT/LT Control Panels
  • Electrical Substations
  • Transformers, Generator & Lift Rooms
  • In front of Switchboards
  • Around Buss Bars
  • Outdoor/Indoor On-site use on Live Equipment
Diamond Design Insulating Mat
Black Diamond Design
Blue Texture Insulating Mats
Blue Texture Design
Product CodeClassRecommended
Thickness
Max Use /
Working Voltage
AC Proof VoltageDi-electric Strength
(Withstand Voltage)
Approx. Weight
Per Sqr Mtr.
IM 001A2.0 mm3.3 KV10.0 KV30.0 KV3.2 Kgs
IM 002B2.5 mm11.0 KV22.0 KV45.0 KV4.0 Kgs
IM 003C3.0 mm33.0 KV36.0 KV65.0 KV4.8 Kgs
IM CD (Custom)-Upto 25.0 mmUpto 66.0 KVUpto 70.0 KVUpto 80.0 KV-
Sl No.CharacteristicsValues
1Material CompositionElastomer free from any insertion. Typically, a combination of rubber and synthetic polymers.
2Tensile strength (T.S.)15N/mm2 (min.)
3Elongation at Break (E.B.)250% (min.)
4Leakage Current10 mA (max.)
5Insulation Resistance with Water when tested at 500V1,00,000 MΩ (min.)
6Flame RetardanceExtinguishes within 5 secs (max.)
7Ageing Properties at 70±1°C for 168 hours.T.S. & E.B. not less than 75% of original value.
8Acid, Alkali & Oil ResistanceT.S. & E.B. not less than 80% of original value.
9Working Temperature-10°C to 55°C
Sl No.FeaturesValues
1Standard Size & Design1) 1.0 Mtr. Wide x 2.0 Mtr. Long in Diamond Design.
2) 1.0 Mtr. Wide x 10.0 Mtr. Long in Texture Design.
2Custom Size & DesignMax. width upto 2400mm, length upto 20M and thickness upto 25mm available in Texture Design only.
3Standard ColourBlack & Blue without Metallic Derivatives. (Other colours available on request subject to availability.)
4Manufacturing Tolerance±10% on thickness, ±5% on length, ±2% on width.
5Fixing at SiteWe undertake Fixing at site along with materials subject to certain criteria.

Ordering Information:

  • Class
  • Total Quantity Required
  • Working Voltage
  • Thickness, Length & Width
  • Colour

Note: The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise in writing, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.

Related Products:

ISI Marked Insulating Mats (IS 15652:2006)
ISI Marked Insulating Mats
(IS 15652:2006)

View details

Electrical Rubber Mats (IS 5424:1969)
Rubber Mats
(IS 5424:1969)

View details

Insulation Mats (IEC 61111:2009)
Insulation Mats
(IEC 61111:2009)

View details

Insulation Matting (ASTM-D-178)
Insulating Matting
(ASTM-D-178)

View details

Insulating Matting (AS/NZS – 2978:1995)
Insulation Matting
(AS/NZS 2978:1995)

View details